| The Auto Voltage Controller is designed to maintain the desired E-coat paint film thickness by making fine adjustments to the voltage. Even if you paint a wide variety of wares, there is plenty of built-in capacity to handle a many different situations. An exclusive JP Tech algorithm provides for virtually unlimited number of set points.
A good analogy is to think of a recipe and the ware are painted according to the recipe in use at the time. Some clients have a recipe when a thin coating is requested and then use a different recipe when a thicker coating is required. For hoist type E-coat paint systems a snap shot is taken during the initial ramp up period the final voltage selected based upon a pre-determined table.
Features - Versatile monochrome touch screen (10 x 15 cm) allows easy programming.
- NEMA 4x Plastic enclosure boxes: one for display and power supply, and the other for the PLC and I/O to communicate with your DC rectifier.
- The output of the controller is connected to the rectifier’s voltage & current adjustment controls so that the rectifier can controlled to provide the required output to meet the film thickness targets that have been previously identified.
- Ladder logic of the PLC can be customized to meet almost any special need situation.
Properties - 120 VAC 1 phase, conditioned (3 Amp) power is required.
- Maximum number of ‘recipes’ is 5. Each recipe can handle many different configurations.
|
